Fractions and decimals: three ways to use S⇔D
Entered 3/4 but see 0.75? Use S⇔D to move between the exact fraction and its decimal form, and choose the default fraction format.
6 min read Beginner updated 2026-11-05
The fx-991EX keeps results exact whenever it can: a value that fits a fraction is shown as a fraction, and S⇔D switches it to a decimal. Once that is clear, you will not mistake the rounded form of 1/3 for the exact answer.
Enter a fraction
Enter 3/4
- 1 ▭/▭
Press the fraction key to get two boxes, one above the other.
- 2 3
The cursor starts in the numerator; type 3.
- 3 ▼
Press the down arrow to move to the denominator.
- 4 4
Type the denominator, 4.
- 5 =
The display shows 3/4.
Input
▭/▭ → 3 → ▼ → 4 → =
Result
3/4
Toggle between fraction and decimal
S⇔D means Standard ↔ Decimal: one press changes the fraction to a decimal, another changes it back. The value does not change, only its display.
Steps
- 1 S⇔D
Press it on a result to swap fraction and decimal.
- 2 S⇔D
Press it again to return to the exact fraction.
Input
3/4 → S⇔D
Result
0.75
Press S⇔D once more to return to 3/4.
Mixed numbers and improper fractions
5/4 can be shown as the improper fraction 5/4 or as the mixed number 1 1/4. The default is controlled by Fraction Result in SETUP.
Choose the default format
- 1 SHIFT MENU
Open SETUP.
- 2 ▼
Move to Fraction Result with the arrow keys.
- 3 =
Choose ab/c for mixed numbers or d/c for improper fractions.
Input
5/4 (ab/c mode)
Result
1 1/4 (d/c mode shows 5/4)
Turn a decimal into a fraction
A terminating decimal converts back to an exact fraction. A recurring decimal only has a rounded display; if you need the exact value, enter it as a fraction instead.
Convert 0.75
- 1 0 . 7 5 =
Enter 0.75.
- 2 S⇔D
Press S⇔D; the display shows 3/4.
| Input | After S⇔D | Note |
|---|---|---|
| 1/2 | 0.5 | Terminating decimal |
| 1/4 | 0.25 | Terminating decimal |
| 1/3 | 0.3333333333 | Rounded; press S⇔D again for 1/3 |
| 2/3 | 0.6666666667 | Rounded; press S⇔D again for 2/3 |
Two details that are easy to miss
- The a b/c label above the fraction key matters: SHIFT + fraction enters a mixed number, not an ordinary fraction.
- If the numerator or denominator has too many digits, the calculator may fall back to a decimal. Reduce the fraction first, or calculate in steps.
Was this guide helpful?
Tell us what was unclear, missing or wrong. A concrete sentence is more useful than a rating.