Contents

ClassWiz CW Full-Feature Series Manual

Covers 6 full-feature CW models: 44 keys / 9 rows, with a large part of the functionality gathered into the HOME and SETTINGS menus. The silkscreen differences of the basic tier and the regional versions are on the other manual pages of the same series.

Casio · 6 models · 44 keys / 9 rows · updated 2026-11-01

The CW is the sparsest keyboard of these three generations: the many secondary functions that used to be scattered across the key faces went into menus, and the body keeps only the high-frequency keys. The price is a wholesale change of navigation logic - HOME enters a function and SETTINGS changes setup, and the two no longer share one key.

Keyboard zones

The CW layout recorded here has 44 keys in 9 rows. The top row gathers HOME, SETTINGS, and the arrow keys, and that is where it differs most from the two earlier generations.

fx-991CW 0.
CW layout: HOME picks functions, SETTINGS changes setup, FUNCTION calls up functions, CATALOG lists every command Rendered from the same layout data the online calculator uses — key positions and silkscreen labels are not stylised.
  • HOME: the function home; pick a mode with the arrow keys and enter it with OK or EXE.
  • SETTINGS: the setup menu, holding the angle unit, the display format, and the input mode, so you no longer have to remember a SHIFT combination.
  • FUNCTION: lists the functions available right now; paging through to find an uncommon function is faster than pressing a long key combination.
  • CATALOG: the catalog of every command, the final answer when you cannot find a function on a CW.
  • FORMAT: switches the result display format (fraction, decimal, scientific notation), the equivalent of S⇔D on older models.

The two-layer silkscreen table

KeySHIFT layerALPHA layer
xQR—
▭/▭▭▭/▭—
√▭∛▭—
x^▭x⁻¹—
x²▭log—
log▭ln—
sinsin⁻¹—
coscos⁻¹—
tantan⁻¹—
(=—
),—
7π—
8e—
9i—
DELINS—
ACOFF—
4A—
5B—
6C—
1D—
2E—
3F—
+°′″—
−(−)—
0x—
.y—
×10ˣz—
EXE≈—

Nine rows of keys, checked row by row from the bottom up

The CW has the same number of rows as ES/EX (nine), but the duties of the top three rows have been thoroughly rearranged: the arrow keys and HOME/SETTINGS take the top two rows, and SHIFT is pushed down to the left of the third. The row-by-row comparison follows.

Row (bottom to top)KeysWhat this row handles
Row 90 / . / ×10ˣ / FORMAT / EXE
Row 81 / 2 / 3 / + / −
Row 74 / 5 / 6 / × / ÷
Row 67 / 8 / 9 / DEL / AC
Row 5Ans / sin / cos / tan / ( / )
Row 4x / ▭/▭ / √▭ / x^▭ / x²▭ / log▭
Row 3SHIFT / VARIABLE / FUNCTION / CATALOG / TOOLS
Row 2SETTINGS / BACK / ⇟
Row 1ON / HOME / Arrow keys (OK in the centre) / ⇞

The icons in HOME

Pressing HOME brings up the icon list; choose with the arrow keys and enter with OK or EXE. The icon items are trimmed by model, and the list below is the fullest tier.

  • Calculate: ordinary calculation.
  • Statistics: single-variable data and regression; after entering, choose the data type first.
  • Distribution: probability distribution calculations (some models).
  • Spreadsheet: cell-based calculation.
  • Table: function value tables.
  • Equation: equation and system-of-equations solving.
  • Complex: complex-number arithmetic.
  • Base-N: base conversion and bit-wise operations.
  • Matrix / Vector: matrices and vectors.
  • Inequality / Ratio: inequalities and proportion.
  • Function Analysis: function analysis (zeros, extrema, and the like, on some models).

Screen and format

The whole CW line uses a dot-matrix screen, and the status bar shows the current angle unit, display format, and mode. The biggest difference from the older models is that format switching went from "look for S⇔D" to "press FORMAT and choose": there are more choices, including Standard (fractions/radicals), Decimal, and output by significant digits or by decimal places.

What you want to doWhich keyNotes
Fraction <-> decimalFORMATChoose Standard or Decimal
Change the angle unitSETTINGSThe Angle Unit entry
Change the display digitsSETTINGSNumber Format: Fix / Sci / Norm
Find an obscure functionCATALOGEvery command, listed by category
Check variablesVARIABLEA-F, x, y, z, and M on one screen

Three things to know when you move from ES/EX to CW

  1. There is no MODE key any more: to change the calculation mode, press HOME instead of still looking for MODE.
  2. Setup no longer goes through SHIFT: press SETTINGS directly. That is one step shorter, but the menus moved, so the hierarchy needs relearning.
  3. DEL and AC have not moved; they are still right of the number area, and the meanings - DEL backs up, AC clears the line - stay unchanged.

Error messages at a glance

MessageMeaningWhat to do
Syntax ERRORAn unclosed parenthesis, operators typed back to back, or a template with nothing in itLocate the spot with the arrow keys and fix it with DEL
Math ERRORDivision by zero, an even root of a negative number, a logarithm argument <= 0Press AC and check the arguments; confirm the angle unit while you are at it
Stack ERRORThe nesting depth or the number range is exceededSplit into steps and carry the result in Ans
Argument ERRORThe argument is outside the function's domainRewrite the argument or use an equivalent form
Dimension ERRORMatrix/vector dimensions do not matchReturn to HOME and reset the dimensions
Range ERRORAn invalid table or statistics range (start > end, step <= 0)Set Start / End / Step to the interval you actually need

Maintenance and reset

  1. The reset path: SETTINGS -> Reset, in three levels - Setup, Memory (variables and lists), and All; if you only want to fix a display problem, choose the first level.
  2. Power: the battery configuration differs by regional version, so replace it as marked on the back cover and do one reset afterwards.
  3. A dim screen: check the contrast in SETTINGS first rather than jumping straight to a new battery.
  4. Cleaning: wipe with a dry cloth and do not spray alcohol; liquid in the key gaps is far more fatal than dust.
  5. Long-term storage: take the battery out to avoid leaks; when you bring it back into service, reset first and then change the settings.

Models in this series

Related operations for this series

Frequently asked questions

These questions apply to this series. For the general ones, see all FAQ entries.

Why doesn't sin(30) come out to 0.5?

The model's current angle unit isn't DEG. On Casio ES/EX use SHIFT + SETUP or the menu to switch to Degree; on CW press SETTINGS to reach the angle unit; on TI press DRG or the mode key to switch. The D / R / G marker at the top of the screen is the current unit.

How do I restore factory settings?

Casio: open the setup menu and find Reset (on ES/EX it's the Reset after SHIFT + MODE, on CW it's inside SETTINGS), choose All and confirm; this clears memory, variables, and settings. TI: press 2ND + + (MEM) to enter the MEM menu and choose Reset, or remove the battery and wait a few seconds. Before resetting, write down any formulas and data you need to keep.

What if I only want to clear variables, not reset all settings?

The Casio Reset menu usually has three levels: Setup Data, Memory, and All. Choosing Memory clears only the variables and Ans while keeping the angle unit and display settings. On TI-84 the MEM menu reached with 2ND + + has separate All, Defaults, and Vars options; choose Vars.

What does Math ERROR mean?

The operation is mathematically undefined or out of range: division by 0, an even root of a negative number, tan(90°), or an overly large factorial argument all trigger it. Press AC or CLEAR to clear the line, then check the angle unit and order of operations. It doesn't mean the device is broken.

How do I locate a Syntax ERROR?

It's usually an unclosed parenthesis, two operators in a row, or a function missing an argument. On Casio use the arrow keys to move the cursor to the error and fix it; on TI-84 press 2 (Goto) to jump to the error location. Once fixed you don't need to retype the whole line.

Is Stack ERROR an out-of-memory problem?

It's a nesting or numeric stack overflow, not insufficient storage. It's common with deeply nested parentheses, repeated power operations, or very large factorials. Split the calculation into two steps and carry the intermediate result with Ans.

The result is always a fraction; how do I show it as a decimal?

On Casio press S⇔D (FORMAT on CW) to toggle between fraction and decimal; you can also change the result display to LineIO / Decimal in the settings. On TI press 2ND + ENTER (F◂▸D) or just enter the value with a decimal point. Toggling only changes the display, not the stored value.

How do I turn 0.375 into 3/8?

Enter 0.375 and press S⇔D (FORMAT on CW, 2ND + ENTER on TI) to try converting it to a fraction. If it won't convert, the decimal can't be represented within the current denominator precision (for example an approximation of a repeating decimal that was truncated).

This is an independent third-party tool site. It is not affiliated with, sponsored by, or authorised by Casio, Texas Instruments or their distributors. Model names and product names are trademarks of their respective owners and appear here only to identify devices.

The keystroke sequences in these manuals were written from this site's own layout data — the same data the online calculator renders — plus publicly available product facts. Specifications and regional configurations are confirmed against the physical device and the manufacturer's most recent material.