Contents

TI-85 Manual

Covers 1 models: 47 keys / 10 rows, with F1-F5 function keys and the EXIT / MORE navigation keys.

Texas Instruments · 1 models · 47 keys / 10 rows · updated 2026-11-02

The keyboard logic of the TI-85 is completely different from today's TI-84: there is a row of F1-F5 keyed to the function labels shown at the bottom of the screen, menus page with MORE and leave with EXIT. Driving it with the muscle memory of a modern model stalls you at every turn, so this site gives it its own manual.

TI-85 0.
TI-85 layout: F1-F5 match the labels at the bottom of the screen, MORE pages, EXIT goes back Rendered from the same layout data the online calculator uses — key positions and silkscreen labels are not stylised.

Ten rows of keys, read from the top down

The top row is F1-F5, which stand for no fixed function; they correspond to the five menu items shown at the bottom of the screen at that moment. That decides how you learn the TI-85: not by memorizing keys, but by reading the screen and then pressing.

Row (top down)Key layoutWhat this row handles
Row 1F1 / F2 / F3 / F4 / F5
Row 22nd / EXIT / MORE / Arrow keys
Row 3ALPHA / x-VAR / DEL
Row 4GRAPH / STAT / PRGM / CUSTOM / CLEAR
Row 5LOG / SIN / COS / TAN / ^
Row 6LN / EE / ( / ) / ÷
Row 7x² / 7 / 8 / 9 / ×
Row 8, / 4 / 5 / 6 / −
Row 9STO▸ / 1 / 2 / 3 / +
Row 10ON / 0 / . / (−) / ENTER
  • F1-F5: press one to run items 1-5 of the labels currently shown at the bottom of the screen, and what they do changes with the screen you are on.
  • MORE: use it when the current menu has another page.
  • EXIT: goes back one level; press it repeatedly to return to the home screen.
  • CUSTOM: custom function keys, attaching frequently used commands to the F keys.
  • 2nd: the second-function layer, the small print above the key face.

2nd-layer silkscreen labels

KeySHIFT layerALPHA layer
F1M1—
F2M2—
F3M3—
F4M4—
F5M5—
EXITQUIT—
MOREMODE—
ALPHAalpha—
x-VARLINK / x—
DELINS—
GRAPHSOLVER—
STATSIMULT—
PRGMPOLY—
CUSTOMCATALOG—
CLEARTOLER—
LOG10ˣ / A—
SINSIN⁻¹ / B—
COSCOS⁻¹ / C—
TANTAN⁻¹ / D—
^π / E—
LNeˣ / F—
EEx! / G—
([ / H—
)] / I—
÷CALC / J—
x²√ / K—
7MATRX / L—
8VECTR / M—
9CPLX / N—
×MATH / O—
,∠ / P—
4CONS / Q—
5CONV / R—
6STRNG / S—
−LIST / T—
STO▸RCL / =—
1BASE / U—
2TEST / V—
3VARS / W—
+MEM / X—
ONOFF—
0CHAR / Y—
.: / Z—
(−)ANS / ˽—
ENTERENTRY—

Graphing one pass with the F keys

  1. Press GRAPH to enter the graph screen; a row of labels appears at the bottom.
  2. Press the F key labelled for editing functions (usually the first one, around F1), which takes you to function entry.
  3. Type the expression and press ENTER to confirm, which returns you to the graph screen.
  4. Press the F key labelled for plotting, and the graph appears on screen.
  5. Move the cursor with the direction keys to read points; when you need a different range, go back to the range settings in the graph menu.

This page deliberately does not say F1 is plot and F2 is range, because the meaning of an F key changes with the screen: the same F1 plots on the graph screen but may edit data on the statistics screen. Trust the label actually shown at the bottom of the screen, and you have the core operating logic of this machine.

The CUSTOM key: pin your frequent commands to the F keys

This generation offers customizable function keys: assign a command you use constantly to an F key slot, and from then on, whatever screen you are on, pressing it runs that command. For someone who repeats the same operations every day, this is the only way to offset the deep menu layers.

  • Open the CUSTOM edit screen first, choose a slot, then type the command name into it.
  • There are only a limited number of slots, so give priority to operations you press every day that are buried two menu levels deep.
  • Custom assignments are ordinary data in memory and may be lost after a power loss or reset, so do not treat them as permanent configuration.

Variables: how STO▸ and RCL divide the work

Variable handling on this machine is two separate actions, store and recall: STO▸ writes the current value into a variable name, and RCL brings a variable's value back onto the current line. A name may be a single letter or a longer word; how long a name is supported depends on the model, so single letters are the safest choice.

  1. After computing an intermediate result, press STO▸, type the variable name and press ENTER, and the value is stored.
  2. When you need to reuse it, move the cursor into the expression, press RCL and choose the same variable name.
  3. Overwriting a variable of the same name gives no prompt, so think through which later calculations depend on it before you change a parameter.

Why it is not the same mental model as the TI-84

AspectTI-85TI-84
Menu entryLabels at the bottom of the screen plus the F keysFixed function keys plus second-level menus
Where a feature livesChanges with the screenLargely fixed
PagingThe MORE keyThe direction keys or menu pages
LeavingEXIT, one level at a timeCLEAR / 2ND + MODE
CustomizationCUSTOM can hold commandsNo equivalent mechanism

This table explains a common sight: someone who knows the TI-84 cannot find features on a TI-85, not because they are slow, but because the two machines organize the address of a feature differently. One works by position, the other by screen label. Thinking that through when you switch models shortens the adjustment period a lot.

Should you still use it today

  • As your main machine: not recommended. Tutorials are scarce, the menu layers are deep, and both battery and storage fall short of modern models.
  • As a spare or a collection piece: fine. Its key layout and feel are distinctive, and it is a direct way to understand how graphing calculators evolved.
  • As an exam machine: first confirm the exam still accepts a model of that era and series, then check whether the memory has to be cleared.

Errors and troubleshooting

SymptomUsual causeWhat to do
A syntax error after you enter somethingUnmatched parentheses or a function missing its argumentFix it with DEL, or EXIT out and start over
A blank screen after plottingThe range is far off the scale of the functionBack to the range settings, and narrow or widen the interval
An F key does nothingThere is no matching label on the current screenPress MORE to page, or EXIT back to the previous menu level

Battery and upkeep

  • It runs on dry-cell batteries; replace them with the size and count marked on the back cover. Graphing slows down, and can fail outright, when the charge is low.
  • Adjust the contrast with 2nd + direction keys; if the display looks fuzzy, try the contrast before blaming the batteries.
  • Take the batteries out for long storage: on early models, leakage that corrodes the circuit board is essentially unrepairable.
  • Clean with a dry cloth and do not spray alcohol into the key gaps.

Models in this series

Related operations for this series

Frequently asked questions

These questions apply to this series. For the general ones, see all FAQ entries.

Why doesn't sin(30) come out to 0.5?

The model's current angle unit isn't DEG. On Casio ES/EX use SHIFT + SETUP or the menu to switch to Degree; on CW press SETTINGS to reach the angle unit; on TI press DRG or the mode key to switch. The D / R / G marker at the top of the screen is the current unit.

How do I restore factory settings?

Casio: open the setup menu and find Reset (on ES/EX it's the Reset after SHIFT + MODE, on CW it's inside SETTINGS), choose All and confirm; this clears memory, variables, and settings. TI: press 2ND + + (MEM) to enter the MEM menu and choose Reset, or remove the battery and wait a few seconds. Before resetting, write down any formulas and data you need to keep.

What if I only want to clear variables, not reset all settings?

The Casio Reset menu usually has three levels: Setup Data, Memory, and All. Choosing Memory clears only the variables and Ans while keeping the angle unit and display settings. On TI-84 the MEM menu reached with 2ND + + has separate All, Defaults, and Vars options; choose Vars.

What does Math ERROR mean?

The operation is mathematically undefined or out of range: division by 0, an even root of a negative number, tan(90°), or an overly large factorial argument all trigger it. Press AC or CLEAR to clear the line, then check the angle unit and order of operations. It doesn't mean the device is broken.

How do I locate a Syntax ERROR?

It's usually an unclosed parenthesis, two operators in a row, or a function missing an argument. On Casio use the arrow keys to move the cursor to the error and fix it; on TI-84 press 2 (Goto) to jump to the error location. Once fixed you don't need to retype the whole line.

The result is always a fraction; how do I show it as a decimal?

On Casio press S⇔D (FORMAT on CW) to toggle between fraction and decimal; you can also change the result display to LineIO / Decimal in the settings. On TI press 2ND + ENTER (F◂▸D) or just enter the value with a decimal point. Toggling only changes the display, not the stored value.

How do I turn 0.375 into 3/8?

Enter 0.375 and press S⇔D (FORMAT on CW, 2ND + ENTER on TI) to try converting it to a fraction. If it won't convert, the decimal can't be represented within the current denominator precision (for example an approximation of a repeating decimal that was truncated).

Why are the negative sign and the minus sign on two separate keys?

The minus sign is a binary operator; the negative sign (−) is a number sign. In 5 − (−3) they must be kept separate, otherwise the device reads two minuses in a row as a syntax error. On TI models the two keys are (−) and −.

This is an independent third-party tool site. It is not affiliated with, sponsored by, or authorised by Casio, Texas Instruments or their distributors. Model names and product names are trademarks of their respective owners and appear here only to identify devices.

The keystroke sequences in these manuals were written from this site's own layout data — the same data the online calculator renders — plus publicly available product facts. Specifications and regional configurations are confirmed against the physical device and the manufacturer's most recent material.