Contents
Matrices and vectors

Vector: dot, cross and the answer that needs a second press

Two named vectors give you a number, a length, an angle and sometimes a third direction - and the dimension you chose decides which of those you get.

8 min read Intermediate updated 2026-11-07

The Vector application is the Matrix one with a single column instead of a grid: a few named slots, two or three components each, defined once and then used by name. The operations split into two kinds, and the split is worth knowing before you type, because one gives you a number and the other gives you another vector.

Define two vectors

Keystrokes for V1 = (2, 3) and V2 = (4, −1)

  1. 1
    MENU

    Open the application menu.

  2. 2
    ▼ ▶

    Move the highlight onto the Vector icon.

  3. 3
    =

    Open the application.

  4. 4
    ▼ =

    Choose the entry that defines a vector, then the slot. Follow the label rather than a number.

  5. 5
    2 =

    The dimension: 2 here. A two-component vector and a three-component one cannot be mixed, and the machine says so rather than padding the gap with zero.

  6. 6
    2 = 3 =

    V1: 2, then 3.

  7. 7
    4 = (−) 1 =

    V2: 4, then −1. That is (−), the sign key, not −, the subtraction key.

  8. 8
    AC

    Leave. Both slots keep their components.

fx-991EX Plus 0.
MENU → the Vector icon → =, then the slot, the dimension and the components. Rendered from the same layout data the online calculator uses — key positions and silkscreen labels are not stylised.

Dot: one number out of two vectors

Multiply matching components and add what you get: 2 × 4 + 3 × (−1) = 8 − 3 = 5. That single number is the whole dot product, and it is also the numerator of the angle question.

QuantityScreenWhere it comes from
V1 · V258 − 3: pairs multiplied, then added
|V1|3.605551275√(2² + 3²) = √13
|V2|4.123105626√(4² + (−1)²) = √17
the angle between them70.34617594°cos⁻¹(5 ÷ (√13 × √17))
a perpendicular pair0(1, 2) · (−2, 1) = −2 + 2: a zero dot product is the right angle
  • That same angle reads 1.227772386 rad or 78.16241771 g. The dot product does not move with the setting; only the angle line does - so when an angle looks wrong, check the unit before you re-do the arithmetic.
  • A dot product is a number, so it can sit inside a longer expression. Divided by the product of the two lengths it is the cosine, which is the entire angle question in one line.
  • The unit vector offered for V1 is (0.5547001962, 0.8320502943): same direction, length 1. It is the piece most often missing from an answer that asks for direction only.

Cross: a vector at right angles to both

The cross product needs three components on both sides. With a = (1, 2, 3) and b = (3, 4, 5) the screen returns (−2, 4, −2), a vector that is at right angles to both of the inputs - and its dot product with either of them is 0.

  • Checking one component by hand is enough to trust the other two: the first is 2 × 5 − 3 × 4 = −2, and the rest follow the same pattern with the pairs rotated.
  • The length √24 = 4.898979486 is the area of the parallelogram spanned by a and b; halve it for the triangle. This is the one place in this chapter where a length means geometry rather than the size of a vector.
  • Swap the inputs and every sign flips: b × a is (2, −4, 2). The dot product does not care about order; the cross product is defined by it.
Example The cross product of (1, 2, 3) and (3, 4, 5)

Input

first component: 2 × 5 − 3 × 4

Result

(-2, 4, -2)

Then check the perpendicularity on the same screen: (−2, 4, −2) · (1, 2, 3) = −2 + 8 − 6 = 0, and against (3, 4, 5) it is −6 + 16 − 10 = 0.

Was this guide helpful?

Tell us what was unclear, missing or wrong. A concrete sentence is more useful than a rating.