ClassWiz CW Spanish Basic Edition Manual
Covers 2 ClassWiz CW Spanish Basic Edition models: 44 keys arranged in 9 rows. 82/85SP: CONFIG, sen/Arc, Simp above Ans.
Casio · 2 models · 44 keys / 9 rows · updated 2026-11-03
The CW is the sparsest keyboard of these three generations: the many secondary functions that used to be scattered across the key faces went into menus, and the body keeps only the high-frequency keys. The price is a wholesale change of navigation logic - HOME enters a function and SETTINGS changes setup, and the two no longer share one key.
Keyboard zones
The CW layout recorded here has 44 keys in 9 rows. The top row gathers HOME, SETTINGS, and the arrow keys, and that is where it differs most from the two earlier generations.
- HOME: the function home; pick a mode with the arrow keys and enter it with OK or EXE.
- SETTINGS: the setup menu, holding the angle unit, the display format, and the input mode, so you no longer have to remember a SHIFT combination.
- FUNCTION: lists the functions available right now; paging through to find an uncommon function is faster than pressing a long key combination.
- CATALOG: the catalog of every command, the final answer when you cannot find a function on a CW.
- FORMAT: switches the result display format (fraction, decimal, scientific notation), the equivalent of S⇔D on older models.
The two-layer silkscreen table
| Key | SHIFT layer | ALPHA layer |
|---|---|---|
| x | QR | — |
| ▭/▭ | ▭▭/▭ | — |
| √▭ | ∛▭ | — |
| x^▭ | x⁻¹ | — |
| x²▭ | log | — |
| log▭ | ln | — |
| Ans | Simp | — |
| sen | Arc sen | — |
| cos | Arc cos | — |
| tan | Arc tan | — |
| ) | ; | — |
| 7 | π | — |
| 8 | e | — |
| DEL | INS | — |
| AC | OFF | — |
| 4 | A | — |
| 5 | B | — |
| 6 | C | — |
| 1 | D | — |
| 2 | E | — |
| 3 | F | — |
| + | °′″ | — |
| − | (−) | — |
| 0 | x | — |
| . | y | — |
| ×10ˣ | z | — |
| EXE | ≈ | — |
Nine rows of keys, checked row by row from the bottom up
The CW has the same number of rows as ES/EX (nine), but the duties of the top three rows have been thoroughly rearranged: the arrow keys and HOME/SETTINGS take the top two rows, and SHIFT is pushed down to the left of the third. The row-by-row comparison follows.
| Row (bottom to top) | Keys | What this row handles |
|---|---|---|
| Row 9 | 0 / . / ×10ˣ / FORMAT / EXE | |
| Row 8 | 1 / 2 / 3 / + / − | |
| Row 7 | 4 / 5 / 6 / × / ÷ | |
| Row 6 | 7 / 8 / 9 / DEL / AC | |
| Row 5 | Ans / sen / cos / tan / ( / ) | |
| Row 4 | x / ▭/▭ / √▭ / x^▭ / x²▭ / log▭ | |
| Row 3 | SHIFT / VARIABLE / FUNCTION / CATALOG / TOOLS | |
| Row 2 | CONFIG / BACK / ⇟ | |
| Row 1 | ON / HOME / Arrow keys (OK in the centre) / ⇞ |
The icons in HOME
Pressing HOME brings up the icon list; choose with the arrow keys and enter with OK or EXE. The icon items are trimmed by model, and the list below is the fullest tier.
- Calculate: ordinary calculation.
- Statistics: single-variable data and regression; after entering, choose the data type first.
- Distribution: probability distribution calculations (some models).
- Spreadsheet: cell-based calculation.
- Table: function value tables.
- Equation: equation and system-of-equations solving.
- Complex: complex-number arithmetic.
- Base-N: base conversion and bit-wise operations.
- Matrix / Vector: matrices and vectors.
- Inequality / Ratio: inequalities and proportion.
- Function Analysis: function analysis (zeros, extrema, and the like, on some models).
Screen and format
The whole CW line uses a dot-matrix screen, and the status bar shows the current angle unit, display format, and mode. The biggest difference from the older models is that format switching went from "look for S⇔D" to "press FORMAT and choose": there are more choices, including Standard (fractions/radicals), Decimal, and output by significant digits or by decimal places.
| What you want to do | Which key | Notes |
|---|---|---|
| Fraction <-> decimal | FORMAT | Choose Standard or Decimal |
| Change the angle unit | SETTINGS | The Angle Unit entry |
| Change the display digits | SETTINGS | Number Format: Fix / Sci / Norm |
| Find an obscure function | CATALOG | Every command, listed by category |
| Check variables | VARIABLE | A-F, x, y, z, and M on one screen |
Three things to know when you move from ES/EX to CW
- There is no MODE key any more: to change the calculation mode, press HOME instead of still looking for MODE.
- Setup no longer goes through SHIFT: press SETTINGS directly. That is one step shorter, but the menus moved, so the hierarchy needs relearning.
- DEL and AC have not moved; they are still right of the number area, and the meanings - DEL backs up, AC clears the line - stay unchanged.
Error messages at a glance
| Message | Meaning | What to do |
|---|---|---|
| Syntax ERROR | An unclosed parenthesis, operators typed back to back, or a template with nothing in it | Locate the spot with the arrow keys and fix it with DEL |
| Math ERROR | Division by zero, an even root of a negative number, a logarithm argument <= 0 | Press AC and check the arguments; confirm the angle unit while you are at it |
| Stack ERROR | The nesting depth or the number range is exceeded | Split into steps and carry the result in Ans |
| Argument ERROR | The argument is outside the function's domain | Rewrite the argument or use an equivalent form |
| Dimension ERROR | Matrix/vector dimensions do not match | Return to HOME and reset the dimensions |
| Range ERROR | An invalid table or statistics range (start > end, step <= 0) | Set Start / End / Step to the interval you actually need |
Maintenance and reset
- The reset path: SETTINGS -> Reset, in three levels - Setup, Memory (variables and lists), and All; if you only want to fix a display problem, choose the first level.
- Power: the battery configuration differs by regional version, so replace it as marked on the back cover and do one reset afterwards.
- A dim screen: check the contrast in SETTINGS first rather than jumping straight to a new battery.
- Cleaning: wipe with a dry cloth and do not spray alcohol; liquid in the key gaps is far more fatal than dust.
- Long-term storage: take the battery out to avoid leaks; when you bring it back into service, reset first and then change the settings.
Models in this series
Frequently asked questions
These questions apply to this series. For the general ones, see all FAQ entries.
Why doesn't sin(30) come out to 0.5?
The model's current angle unit isn't DEG. On Casio ES/EX use SHIFT + SETUP or the menu to switch to Degree; on CW press SETTINGS to reach the angle unit; on TI press DRG or the mode key to switch. The D / R / G marker at the top of the screen is the current unit.
How do I restore factory settings?
Casio: open the setup menu and find Reset (on ES/EX it's the Reset after SHIFT + MODE, on CW it's inside SETTINGS), choose All and confirm; this clears memory, variables, and settings. TI: press 2ND + + (MEM) to enter the MEM menu and choose Reset, or remove the battery and wait a few seconds. Before resetting, write down any formulas and data you need to keep.
What if I only want to clear variables, not reset all settings?
The Casio Reset menu usually has three levels: Setup Data, Memory, and All. Choosing Memory clears only the variables and Ans while keeping the angle unit and display settings. On TI-84 the MEM menu reached with 2ND + + has separate All, Defaults, and Vars options; choose Vars.
What does Math ERROR mean?
The operation is mathematically undefined or out of range: division by 0, an even root of a negative number, tan(90°), or an overly large factorial argument all trigger it. Press AC or CLEAR to clear the line, then check the angle unit and order of operations. It doesn't mean the device is broken.
How do I locate a Syntax ERROR?
It's usually an unclosed parenthesis, two operators in a row, or a function missing an argument. On Casio use the arrow keys to move the cursor to the error and fix it; on TI-84 press 2 (Goto) to jump to the error location. Once fixed you don't need to retype the whole line.
Is Stack ERROR an out-of-memory problem?
It's a nesting or numeric stack overflow, not insufficient storage. It's common with deeply nested parentheses, repeated power operations, or very large factorials. Split the calculation into two steps and carry the intermediate result with Ans.
The result is always a fraction; how do I show it as a decimal?
On Casio press S⇔D (FORMAT on CW) to toggle between fraction and decimal; you can also change the result display to LineIO / Decimal in the settings. On TI press 2ND + ENTER (F◂▸D) or just enter the value with a decimal point. Toggling only changes the display, not the stored value.
How do I turn 0.375 into 3/8?
Enter 0.375 and press S⇔D (FORMAT on CW, 2ND + ENTER on TI) to try converting it to a fraction. If it won't convert, the decimal can't be represented within the current denominator precision (for example an approximation of a repeating decimal that was truncated).