TI-Nspire Manual
Covers 1 models: 71 keys / 12 rows, with an alphabetic key pad and desktop-style keys such as esc / doc / tab / ctrl.
Texas Instruments · 1 models · 71 keys / 12 rows · updated 2026-11-02
The unit you work with on a TI-Nspire is not a single calculation but a document: a document can hold several pages, and each page is a Calculator, Graphs, Lists & Spreadsheet or Notes app. That is why its keyboard carries keys you normally only meet in desktop software: esc, doc, tab and ctrl.
Twelve rows of keys: desktop keys on top, letter pad below
The TI-Nspire keyboard splits into two zones with completely different characters: the top four rows are esc / doc / tab / menu and other desktop-software keys, and the eight rows below hold the digits, the operators and a whole block of letter keys. The row-by-row comparison follows.
| Row (top down) | Key layout | What this row handles |
|---|---|---|
| Row 1 | esc / touchpad / ⌂on | |
| Row 2 | ▤ / doc▾ | |
| Row 3 | tab / menu | |
| Row 4 | ctrl / shift / var / del | |
| Row 5 | = / trig / 7 / 8 / 9 / |a| / ▥ | |
| Row 6 | ^ / x² / 4 / 5 / 6 / × / ÷ | |
| Row 7 | eˣ / 10ˣ / 1 / 2 / 3 / + / − | |
| Row 8 | ( / ) / 0 / . / (−) / enter | |
| Row 9 | EE / A / B / C / D / E / F / G / ?!▸ | |
| Row 10 | π▸ / H / I / J / K / L / M / N / ¶ | |
| Row 11 | , / O / P / Q / R / S / T / U / ↩ | |
| Row 12 | V / W / X / Y / Z / ␣ |
The five navigation keys
- doc: the document menu, where you create, save and close documents.
- tab: switches between the pages inside a document.
- menu: opens the context menu of the current app, the equivalent of a right-click menu.
- esc: cancels the current action or closes a menu.
- ctrl: the keypress modifier, combined with the letter keys for copy, paste and similar operations.
The Scratchpad: calculate without creating a document
Press ON and you land straight in the Scratchpad, where you can do quick calculations without creating a document first. Nothing in the Scratchpad survives power-off, so create a real document when you need to keep something. This is the question newcomers ask most often.
What each of the six app types handles
When you create a document you choose an app, and that choice decides what the current page can do. Of the six app types, the first two cover almost every class task, and the other four are for when you specifically need them.
| App | What it does | Typical use |
|---|---|---|
| Calculator | Evaluates expressions, with both symbolic and numeric computation | Simplifying algebra, solving equations, matrix operations |
| Graphs | Plots functions, parametric equations, polar curves and inequalities | Seeing the shape, finding zeros and intersections |
| Geometry | Constructs and measures geometric figures, with dragging to check | Moving points, loci and invariants |
| Lists & Spreadsheet | Enters data and does Statistics and fitting | Regression, data tables, applying a formula to many cells |
| Data & Statistics | Draws data as scatter plots, histograms and box plots | Judging the shape of a distribution, observing outliers |
| Notes | Records text and formulas, with calculations inserted inline | Writing up a solution, drafting work |
The life cycle of a document
- Press doc to open the document menu and choose to create a new document or open an existing one.
- For a new document choose an app and you enter the first page; later you can add more pages with Insert > App in the menu.
- Use tab to move between pages, and ctrl + tab to move in the opposite direction (depending on the model).
- When you are done, save from the doc menu and give the document a file name you can recognize by its content.
- After you close a document and power on again, you return to the document manager rather than to the page you left.
This sequence is the step newcomers skip most often: plenty of people finish a calculation and power straight off, assuming the content is still there. In fact an unsaved document is not kept, and the Scratchpad never saves anything at all. Make it a habit to create the document first and save when you finish, which is far less painful than hunting for lost data afterwards.
Variables and cross-page references
- Define a variable with an assignment (for instance giving a an expression), and afterwards refer to that same name on any page.
- Overwriting a name happens silently: the new value simply replaces the old one with no prompt. Think through the scope of the damage before you change a parameter.
- There are two evaluation forms: exact form (fractions, radicals, results containing pi) and approximate decimal. The same expression evaluated the other way gives a completely different form.
- Variable names are case sensitive, and typing them on the letter pad is faster than picking them out of a menu.
The real difference between CAS and non-CAS
A version with CAS does symbolic work: simplifying, expanding, and giving exact results for derivatives and integrals directly. A version without CAS is mainly numeric, so a symbolic problem returns only an approximation or no solution at all. This is not a difference of a few extra features but of whether that class of problem is possible.
- The models look close to identical but have different model names. Write down the full model name and check it before you buy.
- Some exams allow only non-CAS models, and a CAS version may be refused outright.
- Conversely, if your course needs symbolic derivation, a non-CAS version makes many problems impossible to finish.
How the mental model differs from the TI-84
| Aspect | TI-84 | TI-Nspire |
|---|---|---|
| Unit of work | One calculation, one picture | One document, several pages |
| Entry point | A function key takes you straight in | doc to create a document, then choose an app |
| Menus | Fixed menus at fixed positions | Context menus that change with the app |
| Variables | Single-letter variables plus lists | Names you choose, shared across pages |
| After closing | The content is still there for the next session | An unsaved document is not kept |
The point of this table is not to rank the two but to explain why following a TI-84 tutorial on this machine stalls you: the unit of work is different, so what you cannot find is usually not one key but a whole level.
A suggested path to learning it
- Start with a few days of plain calculation in the Scratchpad to build up feel for the letter pad and for enter / esc.
- Then create a document that holds only Calculator pages and practice defining a variable, referring to it, and saving.
- Add a graph page next and plot using a variable from the same document, so you can feel what cross-page references are worth.
- Finally learn the Lists & Spreadsheet page for Statistics, chaining data, regression and graphs into one line of work.
Do not start with a multi-page document: the more pages there are, the easier it is to get lost between tab and esc, ending up with neither a result nor a remembered workflow. Take the four steps in order, and each one is usable on its own.
Shift-layer silkscreen labels
| Key | SHIFT layer | ALPHA layer |
|---|---|---|
| esc | ↶ | — |
| ⌂on | off | — |
| ▤ | save | — |
| doc▾ | + page | — |
| menu | ▤ | — |
| shift | CAPS | — |
| var | sto→ | — |
| del | clear | — |
| = | ≠≥▸ | — |
| trig | ? | — |
| |a| | := | — |
| ▥ | ∞β° | — |
| ^ | n√x | — |
| x² | √ | — |
| × | " | — |
| ÷ | ° | — |
| eˣ | ln | — |
| 10ˣ | log | — |
| + | ◐▸ | — |
| − | ◂◐ | — |
| ( | [] | — |
| ) | {} | — |
| . | capture | — |
| (−) | ans | — |
| enter | ≈ | — |
Four common sticking points
| Symptom | Cause | What to do |
|---|---|---|
| You cannot find a feature | The current app does not support it, or it sits at a different menu level | Press menu and look through the context menu, then search everything in Catalog |
| You edited an expression but the result did not change | You did not press enter to execute it | The Nspire does not recompute on its own, so press enter after any change |
| The graph is completely blank | The window range does not match the scale of the function | Open the graph settings and change Xmin/Xmax, or pick the default zoom |
| Content is gone after power-off | The Scratchpad does not save | Create a document and save it when you need to keep something |
Charging, backup and cleaning
- The CX line uses a rechargeable battery: charge it as the unit's marking says, store it at about half charge for long periods, and avoid deep discharge.
- Backup: export documents to a computer or another device; content here is managed document by document, so a loss takes the whole document.
- Screen: the color display fears pressure, so do not pack it in a bag with hard objects; wipe it dry with a microfiber cloth and use no alcohol.
- The key area is one continuous membrane, so keep liquid out; if liquid gets in, do not force it to start - power off and let it dry first.
Models in this series
Related operations for this series
- Factory reset and selective clearing A reset wipes variables, programs, and settings - tell the All / Memory / Setup scopes apart before you press anything.
- Numerical equation solving with SOLVE Enter the equation, give a starting value, and the machine iterates to a solution; a poor starting value lands on a different root or errors out.
- How to turn on exam mode (Press-to-Test) Press-to-Test on TI graphing models temporarily disables programs and some features, and a restart restores everything; Casio has no mode by this name.
- Graphing a function and tuning the window The function is right but the graph is blank - nine times out of ten the window is wrong; fix the window before staring at the curve.
- Solving a system of two linear equations With simultaneous-equation mode, enter the coefficients; without it, use matrix rref or elimination - all three paths should agree.
Frequently asked questions
These questions apply to this series. For the general ones, see all FAQ entries.
Why doesn't sin(30) come out to 0.5?
The model's current angle unit isn't DEG. On Casio ES/EX use SHIFT + SETUP or the menu to switch to Degree; on CW press SETTINGS to reach the angle unit; on TI press DRG or the mode key to switch. The D / R / G marker at the top of the screen is the current unit.
How do I restore factory settings?
Casio: open the setup menu and find Reset (on ES/EX it's the Reset after SHIFT + MODE, on CW it's inside SETTINGS), choose All and confirm; this clears memory, variables, and settings. TI: press 2ND + + (MEM) to enter the MEM menu and choose Reset, or remove the battery and wait a few seconds. Before resetting, write down any formulas and data you need to keep.
What if I only want to clear variables, not reset all settings?
The Casio Reset menu usually has three levels: Setup Data, Memory, and All. Choosing Memory clears only the variables and Ans while keeping the angle unit and display settings. On TI-84 the MEM menu reached with 2ND + + has separate All, Defaults, and Vars options; choose Vars.
What does Math ERROR mean?
The operation is mathematically undefined or out of range: division by 0, an even root of a negative number, tan(90°), or an overly large factorial argument all trigger it. Press AC or CLEAR to clear the line, then check the angle unit and order of operations. It doesn't mean the device is broken.
How do I locate a Syntax ERROR?
It's usually an unclosed parenthesis, two operators in a row, or a function missing an argument. On Casio use the arrow keys to move the cursor to the error and fix it; on TI-84 press 2 (Goto) to jump to the error location. Once fixed you don't need to retype the whole line.
The result is always a fraction; how do I show it as a decimal?
On Casio press S⇔D (FORMAT on CW) to toggle between fraction and decimal; you can also change the result display to LineIO / Decimal in the settings. On TI press 2ND + ENTER (F◂▸D) or just enter the value with a decimal point. Toggling only changes the display, not the stored value.
How do I turn 0.375 into 3/8?
Enter 0.375 and press S⇔D (FORMAT on CW, 2ND + ENTER on TI) to try converting it to a fraction. If it won't convert, the decimal can't be represented within the current denominator precision (for example an approximation of a repeating decimal that was truncated).
Why are the negative sign and the minus sign on two separate keys?
The minus sign is a binary operator; the negative sign (−) is a number sign. In 5 − (−3) they must be kept separate, otherwise the device reads two minuses in a row as a syntax error. On TI models the two keys are (−) and −.