ClassWiz EX Series Manual
Covers 6 EX models: 47 keys / 9 rows, entering functions through the MENU icon menu and changing setup through SHIFT + MENU.
Casio · 6 models · 47 keys / 9 rows · updated 2026-11-01
The EX generation turned modes into icon menus: you no longer memorize a number code for each mode; MENU opens a screen of icons that you choose with the arrow keys. The screen is still dot-matrix, but denser and wider, able to draw icon menus and show complete math typesetting. The price is a rearranged keyboard - this layout has no MODE key, and MENU, OPTN, ON, and STO take its place.
Keyboard zones
The EX layout recorded here has 47 keys in 9 rows, with arrow keys. Compared with ES PLUS, the top two rows are where you most need to rebuild muscle memory.
- MENU: opens the function menu (Calculate, Statistics, Table, Equation, and so on); pick an item and press = to enter it.
- OPTN: the options available in the current context, for example turning a result into a fraction or taking a numerical approximation.
- STO: stores the current value into a variable; the EX generation gave STO its own key instead of leaving it in the SHIFT layer.
- S⇔D: switches the display between fraction and decimal without changing the value actually stored.
The two-layer silkscreen table
On the EX the SHIFT labels are mostly secondary functions, while the ALPHA labels are mostly variables and constants. The table below is generated from this site's layout data and matches the diagram above key by key.
| Key | SHIFT layer | ALPHA layer |
|---|---|---|
| MENU | SETUP | — |
| OPTN | QR | — |
| CALC | SOLVE / = | — |
| ∫▭ | d/dx▭ / : | — |
| x | Σ▭ | — |
| ▭/▭ | a b/c / d/c | — |
| √▭ | ³√▭ | — |
| x² | x³ / DEC | — |
| x^▭ | ˣ√▭ / HEX | — |
| log▭ | 10▭ / BIN | — |
| ln▭ | e▭ / OCT | — |
| (−) | log / A | — |
| °′″ | FACT / B | — |
| x⁻¹ | x! / C | — |
| sin | sin⁻¹ / D | — |
| cos | cos⁻¹ / E | — |
| tan | tan⁻¹ / F | — |
| STO | RECALL | — |
| ENG | ∠ / i | — |
| ( | Abs | — |
| ) | , / x | — |
| S⇔D | a b/c⇄d/c / y | — |
| M+ | M− / M | — |
| 7 | CONST | — |
| 8 | CONV | — |
| 9 | RESET | — |
| DEL | INS / UNDO | — |
| AC | OFF | — |
| × | nPr | — |
| ÷ | nCr | — |
| + | Pol | — |
| − | Rec | — |
| 0 | Rnd | — |
| . | Ran# / RanInt | — |
| ×10ˣ | π / e | — |
| Ans | % | — |
| = | ≈ | — |
Nine rows of keys, checked row by row from the bottom up
The EX key layout looks like the first ES generation, but three things moved: the decimal point changed back from a comma to a dot, STO became its own key, and the bottom-right corner is still the equals sign. Row by row against the diagram above, the row order matches exactly.
| Row (bottom to top) | Keys | What this row handles |
|---|---|---|
| Row 9 | 0 / . / ×10ˣ / Ans / = | |
| Row 8 | 1 / 2 / 3 / + / − | |
| Row 7 | 4 / 5 / 6 / × / ÷ | |
| Row 6 | 7 / 8 / 9 / DEL / AC | |
| Row 5 | STO / ENG / ( / ) / S⇔D / M+ | |
| Row 4 | (−) / °′″ / x⁻¹ / sin / cos / tan | |
| Row 3 | ▭/▭ / √▭ / x² / x^▭ / log▭ / ln▭ | |
| Row 2 | OPTN / CALC / ∫▭ / x | |
| Row 1 | SHIFT / ALPHA / Arrow keys / MENU / ON |
What the icons in MENU stand for
EX uses an icon menu instead of mode numbers, and the way in is always MENU -> choose with the arrow keys -> =. The icon set is trimmed by model; the list below describes the fullest tier, and what is on your own screen is the authority.
- Calculate: ordinary calculation; nine-tenths of your time goes here.
- Statistics: single-variable data and regression, with sub-items such as 1-Variable and y=a+bx chosen after entering.
- Distribution: probability and cumulative values for the normal, binomial, and Poisson distributions (provided on some models).
- Spreadsheet: calculation cell by cell like a spreadsheet program, suited to data in columns.
- Table: give f(x) and a step width to generate a table of values.
- Equation / Func: equation solving, function zeros, and extrema.
- Complex: complex-number arithmetic and polar conversion.
- Base-N: base conversion and bit-wise operations.
- Matrix / Vector: matrices and vectors are entered separately; do not look for one inside the other.
- Ratio / Inequality: proportion and inequality, common in secondary-school problems.
Status information on the dot-matrix screen
| Screen element | Meaning | What to watch |
|---|---|---|
| D / R / G | The angle unit | May return to its default after a mode change or a reset |
| Math / Line | Whether input/output is Natural Display or single-line text | In Line mode a fraction shows as a/b, which is easier to copy onto paper |
| Norm / Fix / Sci | The result display format | Fix affects only the display, not the stored value |
| Complex format | a+bi or r∠θ | The same result written two ways, so confirm what is required before copying an answer |
| Status icon area | SHIFT / ALPHA / memory / statistics indicators | Placement varies slightly by model; learn the icons, not the positions |
The way into setup changed
The SHIFT + MODE you were used to on ES PLUS no longer exists on the EX. Setup goes through SHIFT + MENU (this layout prints SETUP above the MENU key); inside, page through with the arrow keys to change the angle unit, the display format, and the input/output mode. Press AC to leave and the changes take effect - no extra confirmation.
Error messages at a glance
| Message | Meaning | What to do |
|---|---|---|
| Syntax ERROR | The expression is incomplete: an unclosed parenthesis, operators typed back to back, a function missing its argument | Move the cursor to the position of the error with the arrow keys and fix it with DEL; do not retype the whole line |
| Math ERROR | Mathematically undefined: division by zero, an even root of a negative number, a logarithm of a non-positive number | Clear the line with AC and check the argument range and the angle unit |
| Stack ERROR | The nesting or the number stack overflowed | Split into two steps and carry the intermediate value in Ans |
| Argument ERROR | The argument has the wrong type, for example feeding a negative number to a function that only accepts positive ones | Rewrite the argument or use an equivalent expression |
| Dimension ERROR | Matrix/vector dimensions do not match | Go back to the definitions, check the number of rows and columns, then multiply or add |
| Variable ERROR | The equation has no solution, or the solution is outside the representable range | Check whether a coefficient was entered wrong; "no solution" is itself a valid conclusion |
| Can't Solve / Time Out | The numerical solver failed or ran out of time | Change the initial value or switch to an analytic method; do not press = over and over |
Battery, screen, and maintenance
- Power supply comes in two tiers by model, so do not buy batteries on the impression that all EX units are solar: fx-82EX and fx-350EX use a single AAA cell (the 82EX a carbon R03/UM-4, the 350EX an alkaline LR03/AM4), and only the fx-85EX pairs a solar panel with an LR44. A screen that lights up in strong light does not mean the battery is good, so check the marking on the back cover before an exam.
- Do one reset after changing the battery: Settings -> Reset, so that no old angle unit or display format survives.
- A dim screen: adjust the contrast first (Contrast in Settings), and only consider a new battery if it still looks gray at the limit.
- Cleaning and storage: wipe the key faces with a dry cloth and do not spray alcohol; take the battery out for long storage to guard against leaks.
- The integral and summation templates slow calculations down noticeably; estimate the order of magnitude with a table first, then use the template for the precise calculation.
Models in this series
Related operations for this series
- Switch the angle unit (DEG / RAD / GRA) Get the angle unit wrong and sin(30) comes out wrong. Here is the complete key path across four generations of key layout.
- Entering and displaying scientific notation Use the EE / ×10ˣ key for exponents instead of typing ×10^ by hand.
- Statistics: mean, sample standard deviation, and population standard deviation On the same data set, σx and sx differ by the n−1 factor; before writing up a report, confirm which one you used.
- Storing intermediate results in variables for repeated use The STO operations are entered differently on the four generations, but the meaning is the same: a value goes into a variable, and the variable can take part in calculations.
- Solving a quadratic equation (and the by-hand path on models with no Equation mode) With EQN mode, enter the coefficients directly; without it, use the quadratic formula and mind the sign of the discriminant.
- Generate a table of function values Three things to set: start, end, and step; a wrong step yields a misleading table.
Frequently asked questions
These questions apply to this series. For the general ones, see all FAQ entries.
Why doesn't sin(30) come out to 0.5?
The model's current angle unit isn't DEG. On Casio ES/EX use SHIFT + SETUP or the menu to switch to Degree; on CW press SETTINGS to reach the angle unit; on TI press DRG or the mode key to switch. The D / R / G marker at the top of the screen is the current unit.
How do I restore factory settings?
Casio: open the setup menu and find Reset (on ES/EX it's the Reset after SHIFT + MODE, on CW it's inside SETTINGS), choose All and confirm; this clears memory, variables, and settings. TI: press 2ND + + (MEM) to enter the MEM menu and choose Reset, or remove the battery and wait a few seconds. Before resetting, write down any formulas and data you need to keep.
What if I only want to clear variables, not reset all settings?
The Casio Reset menu usually has three levels: Setup Data, Memory, and All. Choosing Memory clears only the variables and Ans while keeping the angle unit and display settings. On TI-84 the MEM menu reached with 2ND + + has separate All, Defaults, and Vars options; choose Vars.
What does Math ERROR mean?
The operation is mathematically undefined or out of range: division by 0, an even root of a negative number, tan(90°), or an overly large factorial argument all trigger it. Press AC or CLEAR to clear the line, then check the angle unit and order of operations. It doesn't mean the device is broken.
How do I locate a Syntax ERROR?
It's usually an unclosed parenthesis, two operators in a row, or a function missing an argument. On Casio use the arrow keys to move the cursor to the error and fix it; on TI-84 press 2 (Goto) to jump to the error location. Once fixed you don't need to retype the whole line.
Is Stack ERROR an out-of-memory problem?
It's a nesting or numeric stack overflow, not insufficient storage. It's common with deeply nested parentheses, repeated power operations, or very large factorials. Split the calculation into two steps and carry the intermediate result with Ans.
The result is always a fraction; how do I show it as a decimal?
On Casio press S⇔D (FORMAT on CW) to toggle between fraction and decimal; you can also change the result display to LineIO / Decimal in the settings. On TI press 2ND + ENTER (F◂▸D) or just enter the value with a decimal point. Toggling only changes the display, not the stored value.
How do I turn 0.375 into 3/8?
Enter 0.375 and press S⇔D (FORMAT on CW, 2ND + ENTER on TI) to try converting it to a fraction. If it won't convert, the decimal can't be represented within the current denominator precision (for example an approximation of a repeating decimal that was truncated).