TI-84 Plus CE Manual
Covers 1 models: 47 keys / 10 rows, the same key layout as the TI-84 Plus with a color dot-matrix display.
Texas Instruments · 1 models · 47 keys / 10 rows · updated 2026-11-02
CE stands for Color Edition. Its key arrangement is identical to the TI-84 Plus, and the differences are concentrated in the display (a color dot matrix, which lets you tell several curves apart by color) and in the power supply. So this manual covers only what differs from the Plus or exists because of the color screen; for what the keys do, read the TI-84 Plus manual alongside.
The key layout is identical to the TI-84 Plus
The CE's ten-row layout matches the Plus, so instead of repeating the whole row table we give five anchors. To check row by row, open the TI-84 Plus manual: the diagrams on both pages are built from the same rows data, so nothing shifts.
| Key you are looking for | Position | What it is for |
|---|---|---|
| Y= | Row 1, first key | Define functions; where graphing starts |
| GRAPH | Row 1, far right | Plot |
| 2ND | Row 2, first key | Second-function layer |
| DEL / CLEAR | Row 2, third key / Row 5, far right | Backspace and leave-screen: different jobs |
| ENTER | Row 10, far right | Execute and confirm |
Three changes the color screen brings
- Multiple curves are assigned different colors automatically, so during trace it is easier to tell which curve the cursor is on.
- Plot styles (line type and color) are set curve by curve in the y= editor instead of being limited to black and white.
- Screen captures and projector output are clearer in color, which is why classroom demos lean on this model.
What is the same as the TI-84 Plus
The y= / window / zoom / trace / graph workflow, the 2ND and ALPHA layers, and the division of labour between DEL / CLEAR / ENTER are all identical. Any set of steps written for the TI-84 Plus works on this machine by pressing the same keys.
Error messages and color-screen quirks
| Symptom | Cause | What to do |
|---|---|---|
| ERR:SYNTAX | Incomplete expression or unmatched parentheses | Press 2 to jump to the error location and fix it with DEL |
| ERR:INVALID DIM | Statistics lists of different lengths | Back to STAT to check how many elements each list has |
| A graph too faint to read | The plot style was set to a thin line or a light color | Change the line type and color in the Y= editor |
| Screen washed out / dark | Contrast or brightness settings drifted | Adjust with 2ND + direction keys; only consider the battery if that fails |
Charging and upkeep
- Charge it as the unit's marking says and do not use a mismatched charger; store it at about half charge if you will not use it for a while.
- Run time drops noticeably once the battery ages, which is normal wear; replace it with a pack of the same specification.
- The color screen fears pressure and liquid: do not store it with hard objects, and if liquid gets in, power off and let it dry out before turning it back on.
- Clean the screen dry with a microfiber cloth and avoid ammonia-based cleaners.
How the ten rows group
The ten rows fall roughly into five bands: row 1 is the graph keys (Y=, WINDOW, ZOOM, TRACE, GRAPH); rows 2-3 are the function layers, editing and navigation (2ND, MODE, DEL, the direction pad, ALPHA, X,T,θ,n, STAT); row 4 is the function menus (MATH, APPS, PRGM, VARS, CLEAR); rows 5-6 are the scientific functions and brackets (reciprocal, SIN, COS, TAN, power, square, comma, parentheses, divide); rows 7-10 are the digit block, one function on the left of each row (LOG, LN, STO▸, ON) and one operator on the right, with ENTER closing the bottom row. Recognizing a band is faster than recalling a single key, because CE and Plus order the keys inside each band identically.
The practical payoff of the color screen
All three payoffs are concrete. First, multiple functions get different colors automatically and TRACE shows which curve you are on, so long problems do not get their lines mixed up. Second, the Y= editor shows color and line-type markers on the left, so restyling does not need a second-level menu. Third, projector output and screenshots are clearly more readable, which is why many schools standardize on the CE.
Power and charging rhythm
- The CE uses a rechargeable pack charged over USB; read the charging state from the unit's indicator light rather than from whether the screen lights up.
- Do not top up for five minutes right before an exam: a short charge will not last the whole session, so charging fully the night before is steadier.
- Store it at about half charge for long periods; draining it completely speeds up battery aging.
- If run time falls off suddenly, first check whether you are using the backlight and color graphing heavily, and only then blame battery aging.
Test mode on the CE
The CE's restricted mode shares its origin with the Plus: once it is on, programs and some features are blocked, an indicator light comes on, and a notice appears at the top of the screen. The key combination for entering and exiting depends on the model's own manual, because firmware revisions do not all behave the same way. Run the full cycle before the exam: enter, confirm the blocking, exit, confirm everything is back. That is more reliable than only reading the manual.
Built-in apps and exam eligibility
The CE ships with several apps (inequality graphing, a periodic table, probability simulations and similar), and how many and which ones depend on the firmware version. These apps are normally unavailable in restricted mode, and even when they are available you should first confirm that your exam allows them. Do not install third-party programs right before an exam just to have one more tool: the cleanup and disclosure trouble far outweighs the benefit.
CE or Plus
| Aspect | TI-84 Plus | TI-84 Plus CE |
|---|---|---|
| Display | Black-and-white dot matrix | Color dot matrix |
| Telling curves apart | By line type and markers | By color |
| Power | Dry-cell batteries | Rechargeable pack |
| Classroom demos | Mediocre projector contrast | A color screen reads better |
| Exam eligibility | Check the allowed list | Check the allowed list, and watch the charge state |
Let usage frequency decide: if your course regularly plots three or four curves at once or needs projector demos, the color advantage of the CE is real; if you graph occasionally and mostly calculate, the Plus is enough and swapping dry cells is less worrying. The two share exactly the same operating logic, so there is no risk that buying a CE leaves you unable to use a Plus.
Two error messages that are easy to misjudge
| Error | What triggers it | What to do |
|---|---|---|
| ERR:DIM MISMATCH | A matrix or list dimension does not match the operation | Back to the edit screen to check the row and column counts and the number of elements |
| ERR:ARCHIVED | A variable or program is in the archived state | Unarchive it in the MEM manager, then access it again |
What these two have in common is that they are not input syntax mistakes: the expression itself is written correctly, but a data object is in the wrong state. When you hit them, do not check the expression character by character; look at list lengths and variable states first, which saves a lot of time.
A note on archiving while we are here: archiving programs you rarely use saves memory, but an archived object cannot take part in a calculation directly. Before clearing memory, make sure there is no program you still need to keep, because cleared memory cannot be recovered.
A three-second check before you graph
- Whether Y= has extra or empty function lines (an empty line is still selected for graphing and wastes a color).
- Whether the y range in WINDOW covers the approximate values of the function: estimate the order of magnitude first, then set it.
- Whether the graphing type in MODE is Func (polar and parametric settings will either draw nothing or draw an irrelevant curve).
Models in this series
Related operations for this series
- How to turn on exam mode (Press-to-Test) Press-to-Test on TI graphing models temporarily disables programs and some features, and a restart restores everything; Casio has no mode by this name.
- Graphing a function and tuning the window The function is right but the graph is blank - nine times out of ten the window is wrong; fix the window before staring at the curve.
Frequently asked questions
These questions apply to this series. For the general ones, see all FAQ entries.
Why doesn't sin(30) come out to 0.5?
The model's current angle unit isn't DEG. On Casio ES/EX use SHIFT + SETUP or the menu to switch to Degree; on CW press SETTINGS to reach the angle unit; on TI press DRG or the mode key to switch. The D / R / G marker at the top of the screen is the current unit.
How do I restore factory settings?
Casio: open the setup menu and find Reset (on ES/EX it's the Reset after SHIFT + MODE, on CW it's inside SETTINGS), choose All and confirm; this clears memory, variables, and settings. TI: press 2ND + + (MEM) to enter the MEM menu and choose Reset, or remove the battery and wait a few seconds. Before resetting, write down any formulas and data you need to keep.
What if I only want to clear variables, not reset all settings?
The Casio Reset menu usually has three levels: Setup Data, Memory, and All. Choosing Memory clears only the variables and Ans while keeping the angle unit and display settings. On TI-84 the MEM menu reached with 2ND + + has separate All, Defaults, and Vars options; choose Vars.
What does Math ERROR mean?
The operation is mathematically undefined or out of range: division by 0, an even root of a negative number, tan(90°), or an overly large factorial argument all trigger it. Press AC or CLEAR to clear the line, then check the angle unit and order of operations. It doesn't mean the device is broken.
How do I locate a Syntax ERROR?
It's usually an unclosed parenthesis, two operators in a row, or a function missing an argument. On Casio use the arrow keys to move the cursor to the error and fix it; on TI-84 press 2 (Goto) to jump to the error location. Once fixed you don't need to retype the whole line.
The result is always a fraction; how do I show it as a decimal?
On Casio press S⇔D (FORMAT on CW) to toggle between fraction and decimal; you can also change the result display to LineIO / Decimal in the settings. On TI press 2ND + ENTER (F◂▸D) or just enter the value with a decimal point. Toggling only changes the display, not the stored value.
How do I turn 0.375 into 3/8?
Enter 0.375 and press S⇔D (FORMAT on CW, 2ND + ENTER on TI) to try converting it to a fraction. If it won't convert, the decimal can't be represented within the current denominator precision (for example an approximation of a repeating decimal that was truncated).
Why are the negative sign and the minus sign on two separate keys?
The minus sign is a binary operator; the negative sign (−) is a number sign. In 5 − (−3) they must be kept separate, otherwise the device reads two minuses in a row as a syntax error. On TI models the two keys are (−) and −.