Contents
Exams and self-checks

The 60-second pre-exam checklist

Angle unit, display format, fraction form, leftover memory, one known value and the reset you actually need - in the same order every time.

5 min read Beginner updated 2026-11-07

Exam disasters on a scientific calculator come from settings far more often than from mathematics. Run these six checks in a fixed order and none of them depends on remembering to run them.

1. Angle unit

Steps

  1. 1
    sin 3 0 ) =

    0.5 means D, which is what a degree paper wants. A result of −0.9880316241 means the machine is in RAD.

2. Display format

Steps

  1. 1
    1 ÷ 3 =

    0.3333333333 is Norm, which is what you want unless the paper says otherwise. 0.333 is Fix 3 and 3.33 × 10⁻¹ is Sci 3, and both will change later answers.

3. Fraction or decimal

S⇔D swaps a result between its fraction and decimal forms. SHIFT + S⇔D is a different setting: it swaps between a mixed number and an improper fraction, so it will not turn 1/4 into 0.25.

Steps

  1. 1
    1 ÷ 4 =

    In Math format the screen shows 1/4.

  2. 2
    S⇔D

    0.25. Press it again to go back.

4. Leftover memory

Variables outlive the question you stored them for, and the applications that read x and y use whatever is in them. Ans is safe, because the next = replaces it.

Steps

  1. 1
    SHIFT STO

    Open the recall list and look at A to F, x, y and M. Anything you did not expect should be stored over with zero.

  2. 2
    0 STO

    Type 0, press STO, then pick the variable to blank it.

5. One known value

TypeExpectedIf it is not
sin 3 0 ) =0.5the angle unit is not D
1 ÷ 3 =0.3333333333a Fix or Sci setting is switched on
5 SHIFT x⁻¹ =120the SHIFT layer was missed; factorial is the x! legend above x⁻¹
2 7 × 4 3 =1161nothing else is wrong, so reset and repeat this list

6. Reset only what is wrong

SHIFT + 9 opens RESET as a list rather than a single yes-or-no. Read the item names before confirming, because a full reset also returns the angle unit and the display format - so the setting that was already right is now one you have changed as well. Run checks 1 to 5 again after any reset.

fx-991EX Plus 0.
The two keys this list ends on: SHIFT → 9 opens RESET as a list, SHIFT → STO opens the recall list. Rendered from the same layout data the online calculator uses — key positions and silkscreen labels are not stylised.

While you work

  • Re-read the top line after you leave an application. Statistics, polar complex answers and every trig calculation depend on the angle unit.
  • Press S⇔D before copying an answer down, so that you choose the form rather than discovering it later.
  • If a probability comes out above 1 or a length comes out negative, suspect a setting before you suspect your method.
  • The screen does not remember your intention. Store the value you will need again - see “Memory: STO, RCL, Ans and what M+ keeps”.

Was this guide helpful?

Tell us what was unclear, missing or wrong. A concrete sentence is more useful than a rating.