Divide 299 792 458 — the speed of light in metres per second, exact by international agreement since 1983 — by a billion, and one nanosecond buys 0.299792458 metres (first link). Convert that through centimetres and inches and it is 11.802852677165 inches, the fourth link, which is the wire Grace Hopper handed round when she wanted an audience to understand that computers are limited by physics rather than by programming. The second link divides by 0.3048 × 10⁹ instead and gives 0.98357105643045 feet: a nanosecond is just under a foot, which is the version worth remembering when you are guessing a cable run.
The number is a design constraint, not a curiosity. A signal cannot cross more than about a foot in a nanosecond, so a processor whose clock period is a nanosecond cannot have a die a metre across — the clock edge would arrive before the far side of the board had seen the last one. The third link divides the same exact speed by a thousand and prints 2.99792458⋅10+5 — metres, not kilometres, because the dividend is metres: the 300 km light covers in a millisecond, a thousandth of the 299 792 km it covers in a second, which is about seven and a half trips round the Earth. A radio wave to a geostationary satellite and back covers 71 572 km of that in roughly a quarter of a second, entirely at the speed of light, and every long phone call, crossed order and replicated database carries a delay of exactly this kind.
Answer
0.299792458
How to read it
299 792 458 / 10⁹ in metres. The second link is the same in feet, the third the kilometres per millisecond, the fourth the inches Hopper cut her wire to.
Source
Rear Admiral Grace M. Hopper's demonstration wires, a length of about eleven inches labelled 'one nanosecond'; the metre is defined by fixing the speed of light at exactly 299 792 458 m/s (17th CGPM, 1983)
Work it in the calculator
These links open the right calculator with this problem's numbers already typed in. The line above is what the screen should show — check it yourself.